GCBC.net - Food Industry Services
Metallic

#1 Source for Stainless Steel Drains, Margia Floors, and More..
 Call 888-244-3415
http://www.vac-n-seal.com  http://www.CustomDrains.com
Home Contents Contact Us

Food Industry
Services

Phone:
U.S. Toll Free
888-244-3415

Outside U.S.
E-mail Us
Se habla 
Español

Up

E-mail Us

Páginas Españolas
Páginas 
Españolas

 

Contact Info:

Food Industry
Services


E-mail:
info@gcbc.net

GCBC.net
 


KORODUR WH-Metallic

KORODUR WH-Metallic = Hard Aggregate acc. to DIN 1100-m 0/4.

Hard metallic aggregate for surfaces which are subject to the most severe stress which require high tensile strength together with a very high wear resistance.

Areas of Application:

For all hard aggregate concrete screeds acc. to DIN 18 560 (1990) - ZE 55 M.

Extremely resistant to bumping and ramming stresses. Especially suited for areas with heavy iron wheel traffic, rolling and impact abrasion of sharp-edged machinery etc.

For the production of "armoured paving".

Properties:

bullet

resistant to petroleum, oil, solvents

bullet

highly wear resistant even under the most severe stress, fork lift-truck resistant

bullet

water-resistant, suitable for use in wet rooms

bullet

non-skid, anti-slip even when subjected to oil spillage and in wet rooms

bullet

de-icer resistant

bullet

non-rusting

bullet

not harmful to health

bullet

not electrostatically chargeable

bullet

easy to clean

bullet

improved surface density

Technical Data

Coating Group DIN 1100 - Coating Group M

Technical Data of hard aggregate acc. to DIN 1100

Specified Values of hard aggregate screeds acc. to DIN 18560-ZE 55 M

acc.to DIN 1100
coating group M

acc.to test certificate
external control
DIN 1100
KORODUR WH-Metallic

quality test

confirmation
test

Tensile strength N/mm2
2
nominal strength (smallest single value) serial strength (avg. value)

-
min. 12

-
13,0

-
>=11

>=10
>=11

Compressive strength N/mm2
2
nominal strength (smallest single value) serial strength (avg. value)

-
min. 80

-
95,0

>=55
>=70

-
-

Wear cm3/50 cm2
2
nominal strength (greatest single value) serial strength (avg. value)
2
nominal strength (greatest single value) serial strength (avg. value)

max. 5,5
max. 5,0

-
4,1

<=4
<=3

-
<=4.0

Bulk density kg/dm3

without norm

1,68

-

-

Granulometric composition

acc.to DIN 4226

acc to DIN 4226

-

-

Qualification test values = DIN 1100-values, screed test values = DIN 18 560 (1990)

Group of Mechanical stress acc. to DIN 18560 (1990) Part 7, Table 1

Stress Group

Mobile industrial handling equipment, kind of tires1

stress caused by operational processes and pedestrian traffic.

I (heavy)

steel and polyamide

processing, grinding and sliding of machinery, placing down of goods by means of metal forks, pedestrian traffic of more than 1000 persons/day

II (medium)

urethane-elastomer and rubber

sliding and rolling of wood, paper rolls and plastic castings, pedestrian traffic of 100 to 1000 persons/day

III (light)

solid tires and pneumatic tires

assembly areas, pedestrian traffic up to 100 persons/day

1 Refers only to clean tires. Commpressed grit, swarf and dirt on tires increase the stress.

Remarks: Where the loading and abrasion potential is beyond the guidelines for "Stress group I", e.g. assembly of heaviest equipment or traffic of heaviest vehicles (crawlers) special precautionary measures must be taken.
Note: Please contact Technical Department for advice.

Processing and Consumption

per m2 according to instructions

Stress Group
acc. to DIN 18560 (1990) Part 7 Table 1

Topping Thickness
acc. to DIN 18560 (1990) Part 7 nominal thickness

Mixing Ratio
1 w.u. cement : 3 w.u. KORODUR WH-Metallic

I (heavy)

8 mm

21 kg/M2 KORODUR WH-Metallic

II (medium)

6 mm

16 kg/M2 KORODUR WH-Metallic

III (light)

6 mm

16 kg/M2 KORODUR WH-Metallic

Food Industry Services
GCBC.net
Toll Free  +1 888 - 244 - 3415