GCBC.net - Food Industry Services
Korodur 0/4

#1 Source for Stainless Steel Drains, Margia Floors, and More..
 Call 888-244-3415
http://www.vac-n-seal.com  http://www.CustomDrains.com
Home Contents Contact Us

Food Industry
Services

Phone:
U.S. Toll Free
888-244-3415

Outside U.S.
E-mail Us
Se habla 
Español

Up

E-mail Us

Páginas Españolas
Páginas 
Españolas

 

Contact Info:

Food Industry
Services


E-mail:
info@gcbc.net

GCBC.net
 


KORODUR
0/4

Non-metallic hard aggregate for cement-bound KORODUR industrial floor screeds

Description:
KORODUR 0/4 - Hard aggregate, non-premixed hardener.

Produced from high grade components comprising quartz and tough by-products from electro-metallurgical smelting processes. This special mixture guarentees outstanding tensile - and compressive strength values and very favorable wearing properties. Korodur 0/4 therefore is non-slip and is capable of withstanding high impact.

KORODUR 0/4 consists of aggregates of varying sizes ranging from 0 to 4 mm in diameter, hardness between Mohs scale 8 and 9.

Areas of Application:
For use in areas of combined rolling, ramming and grinding stress, percussion, pressure and impact. Able to withstand the sliding and rolling of work pieces, plant traffic of all kinds, fork-lift truck movement, crawler tractor traffic and transporting equipment with steel wheels etc.

Especially suited for wet rooms, parking areas, driving and loading ramps, bunker linings and outdoor surfaces of all kinds.

Properties:
bulletResistant to petroleum, mineral oil, solvents
bulletHighly wear resistant even under the most severe stress, fork lift-truck and crawler traffic resistant
bulletSuitable for tank traffic
bulletSuitable for constantly wet areas
bulletNon-skid, anti-slip even when subjected to oil spillage and in wet rooms
bulletDe-icer resistant
bulletNon-rusting
bulletNon-dusting
bulletPhysiologically harmless
bulletNot electrostatically chargeable
bulletEasy to clean

Properties:

Technical Data of KORODUR 0/4
in acc. with DIN 1100
acc.to DIN 1100
coating group A
-average values-
- required -
acc.to independent test certificate
- average values -
Flexural strength N/mm2 min. 10 10.6
Compressive strength N/mm2 min. 80 92.1
Wear cm3/50 cm2
2
grinding wheel method according to Boehme
max. 6.0 5.48
Bulk density kg/dm3 without norm 1.525

Application and consumption:

A) Sprinkling (shaking) - method

KORODUR 0/4 is to be mixed with Portland cement, supplied on site.

"Surface armoring" by application of a mixture of KORODUR 0/4 and cement, according to KORODUR laying instructions.

Type of mixture and consumption

Type of traffic KORODUR 0/4
aggregate
kgs/sqm
Cement
kgs/sqm
Total mix
KOROD.-Cem.
kgs/sqm
Light to medium 5 2.5 7.5
Medium to heavy 7 3.5 10.5

B) KORODUR topping - method

Processing and consumption
according to KORODUR laying instructions

Topping method
(KORODUR mortar system)
Korodur 0/4 mortar mixing ratio
1 w.u. cement: 2 w.u. KORODUR 0/4
water-cement value 0,32-0,40
KORODUR topping
Thickness
KORODUR 0/4
aggregate
kgs/sqm
Cement
kgs/sqm
Total mix
KORODUR-Cement
kgs/sqm
8 mm 12 6 18
10 mm 14 7 21
15 mm 21 10.5 31.5

(w.u. = weight unit)

Food Industry Services
GCBC.net
Toll Free  +1 888 - 244 - 3415